Sluice Valve

PN 0.4, PN 0.6, PN 1.0 & 1.6

HYDRAULIC TEST PRESSURE M Pa (GAUGE)
PN RATING	BODY	SEAT
PN 0.4	0.6	0.4
PN 0.6	0-9	0.6
PN 1.0	1.$	1.0
PN 1.6	2.4	1.6

PN1.0 & PN1.6

HYDRAULIC TEST PRESSURE MPa (GAUGE)
PN RATING	BODY	SEAT
PN1.0	1.5	1.0
PN 1.6	2.4	1.6

Part No	Description	Material & Specification GM Fittings	Material & Specifications SS Fittings
1	Body	CI to IS 210 FG 200	CI to IS 210 FG 200
2	Bonnet	Do	Do
3	Stuffing Box	Do	Do
4	Gland	Do	Do
5	Hand wheel	Do	Do
6	Wedge	Do	Do
7	Wedge Seat	GM to IS 318 GR 2	18/8 SS to AISI 304
8	Body Seat	Do	Do
9	Spindle	13% CR SS to AISI 410	13% CR SS to AISI 410
10	Bolts & Nuts	MS lo IS 1367	MS to IS 1367
11	Gland Packing	Greased Jute	Graphited Asbestos
12	Gasket	Rubbers lo IS 638	CAF to IS 2712
13	Wedge Nut	GM to IS 318 GR 2	18/8 SS to AISI 304/GM

GENERAL MANUFACTURING STANDARD
• Sizes 15 to 40mm NB – BS : 5150
• Sizes 50 to 1200mm NB – IS : 14846/PD ALT-2
• Sizes 50 to 300 mm NB – IS : 780/BS : 5150
• Sizes 350 to 1200mm NB – IS : 2906/BS : 5150

END CONNECTIONS
IS 1538/1S : 6392/BS : 10 Table D or E/ANSI 125 or 150/DIN

SPECIAL REQUIREMENTS CATERED FOR

Valves with all iron construction
Valves for coke oven gas service
Valves to ANSI, DIN & other national or international standards
Valves in M.S. Fabricated / CS / SS construction

OPTIONAL FEATURES :

• Back seat arrangement • Spur / Worn / Bevel gear operation • Integral by-pass arrangement • Thrust Ball-Bearing arrangement • Guide Channel & shoe arrangement • Open & Shut Position Indicator • Drain plug arrangement • Chain & Chain wheel operation • Hand wheel Locking arrangement • Stand post & Extension Rod for remote operation • Electric / Pneumatic / Hydraulic Power Operation

Sluice Valve

Our Contacts

Quick Links

Keep In Touch

Download Catalogue